The Biggest "Myths" About Change Door Lock Could Be True > 자유게시판

Reasons to Change Door Lock

You can change your door lock for many reasons, from increasing the security of your home to re-decorating the entrance. You may need to change locks when your key becomes stuck or is difficult to turn.

Even DIY beginners can easily alter their lock. Get the tools you need to begin.

Remove the old lock

Before installing a new lock it is important to take out the old one from the door. This is crucial in the event that you suspect that someone else may have a key to the home. It could also be a good idea if you have recently moved into a home, experienced a break-in or received a new roommate. It's more simple than you think and can be completed in a matter of minutes.

Start by removing the screws that hold the deadbolt faceplate to the frame of the door. You will need to take off the screws on both sides of the door to take off the faceplate. This will allow you see the hidden screws and give you an understanding of how to proceed with the rest of steps.

After removing the old faceplate you will have to take off the bolt, strike plate and the strike plate. Remove the bolt from the door hole by using a screwdriver. If the bolt is rusted you may need to use a chisel to smash it. When using a chisel remove the bolt, take care to not damage the door frame.

Make sure the new deadbolt, doorknob, and lock will fit into the holes that are already present in the door before you remove the old one. Most hardware stores and big box stores carry several different types of locks. They can assist you in finding the best one to meet your needs. If the upvc window lock replacement you bought does not fit your door.

Find small dents or depressions in the handle and around the trim as you take off the lock. If you find them, use straightened safety pins or a flat screwdriver in order to remove the handle.

After you have removed the screw from the handle, you are able to begin removing the knob. To do this, locate the set screw located at the base of the knob, and loosen it. The next step is to remove the knob from the spindle, and carefully remove the spindle from the door.

Install the new lock

It's a good idea to change the locks on doors in your home on a regular basis, particularly after a burglary or when you move into a new home with roommates. It's a cheap, easy and effective way to ensure that your home is secure. The majority of people can do this themselves with a screwdriver and some basic instructions. You may also wish to learn how to rekey your door lock to ensure that only you have the key.

To start the process, you have to purchase a new lock that matches the keyway of your current lock. You can save money if you rekey the lock yourself. The majority of locksmiths charge a fee for this. You can purchase a new lock from a hardware store, or even online. Standard deadbolts are suitable for the majority of doors. However, you'll have to measure your door to ensure that it will fit.

The lock you buy will typically come with a template showing you how to install it on the door. This template can be used to drill the hole. It's much simpler than having to measure every time. If the template does not match your hole, take it back to the store and purchase a new one.

The new lock on the right-hand side of the door. You can confirm this by inspecting the latch, which should be marked "up" or something similar. Check that the latch is properly placed within the latch plate then secure it with the screws supplied.

When replacing a knob lock it is important to pay attention to its handing. Most knob locks are left-handed, however there are a few that are right-handed. If you are not careful, the knob could be installed on the wrong side of your door, which could make it impossible to lock either from the inside or outside.

When you're done testing your new lock to ensure it works. You should be in a position to lock the door from both the inside and outside, and unlock it using keys. If you're not happy with the outcome you can always contact an expert locksmith to fix the issue.

Test the lock

A lock that does not unlock can be annoying however, it could also put your family's safety at risk. It's not difficult to fix the majority of issues with door locks by doing a bit of troubleshooting and lubrication. To start with, check whether your key has been properly cut and that the lock assembly isn't soiled or loose. If this doesn't solve the problem, you can try applying lubrication to the door lock actuator using powdered graphite or a silicone-based grease.

Make sure that the door lock switch, wiring harnesses, and the actuator connector are working properly. To check this, refer to the manual or wiring diagram to determine the purpose and color-coding for all the door lock switch wires. Utilize a digital meter or test light to check if the actuator is receiving power and is grounded when the switches are activated. If you see an electrical voltage switch with each switch activation, that means the switches are working and it's likely the actuator that needs to be replaced.

If the switch appears to be working but the actuator does not move when you turn it, there could be a problem with the cylinder. The actuator cylinder is loaded with spring pins that prevent the cylinder from moving until the key is placed in and moves the pins upwards to fit the height of the key at the point of entry. In the end, this causes the cylinder to rotate and let the lock body open and allow the handle to latch.

If the door lock actuator is still not working, you can remove it using a small screwdriver. You will need to loosen the locking bolt first and then take off the plastic cover that holds the electrical connector. Then, disconnect the door lock actuator, and let it fall. Then, you should be able find the two 10mm bolts that hold the actuator in place, and remove them. Once the actuator is removed, you should be capable of disconnecting the black electrical connector and remove it along with the lock and actuator assembly.

Replace the key

If your keyed deadbolt or door knob isn't working, you will have to reset it or replace it. This is not difficult and could save you money. But, before doing this, it's an excellent idea to get a locksmith to examine the locks and check them for any problems. This will give you peace of heart that your home is secure and safe.

To begin, take off the faceplate on the outside from the doorknob or deadbolt. If there are screws that hold the faceplate in place, use a screwdriver and remove it. Then, take off the interior faceplate using a screwdriver that has a flat head. Once you have removed the faceplate, you can remove the bolt and a screw from the repair Upvc window lock cylinder.

A locksmith can determine whether you require a replacement upvc window locks or rekey your lock. They can also give you advice on the best security options for your home. They can also make the necessary modifications to your door and frame to ensure an ideal fit. They will also provide an assurance on their work.

If you choose to rekey the lock, you'll have to first buy an additional key for it. It is important to use the lock key that is fitted snugly. A key that is not properly fitted could damage the mechanism's internal mechanisms and prevent it from working. Insert the key into the lock to check its size. If it is flush with the plug, it's of the correct size. If the pins stick up from the top of the plug and are not a good fit, they're too long.

You may need to change the lock on your door for many reasons, including:

If you're moving into a previous owner's home or if you lose keys, rekeying your lock is an affordable alternative than replacing it. It's also less invasive than a complete upvc window replacement lock. However, there are circumstances where rekeying your existing lock isn't possible. For instance, if your lock is damaged or has been jammed repeatedly, it's likely time to replace it.